PREMIERTOGO tackles this problem head-on. Prof. Ing. Philip Farrugia leads the project, treating the lower-limb prosthesis as a system that can be designed, monitored, and adapted for each person. ‘Most existing prosthetics are still largely passive. They don’t capture what’s happening during use, nor do they adapt to it. We wanted to change that baseline,’ says Mr Adrian Mercieca, who works as an RSO on the project.
This ambition shapes every part of the project, from the cover to the knee, ankle, foot, and the sensors inside. The result is more than just one improvement. It is a new way to think about prosthetic design. The most obvious change is the fully 3D-printed cover, which is not just for looks. It shows how 3D printing can make prosthetics better and easier to produce.
Form Follows Force
The team started by looking at the old design. The previous cover was bulky, complicated, and hard to put together. It used standard fasteners, offered little room for personalisation, and had too many parts. The redesign aimed to use fewer parts, make assembly easier, cut weight, and improve its appearance without weakening it.
The cover was designed for 3D printing from the start, rather than being adapted later. That decision matters. Additive manufacturing rewards different shapes, connections, and internal features. ‘If you design for 3D printing from the start, you stop thinking in terms of traditional constraints,’ Mercieca explains. ‘You can simplify structure, reduce components, and integrate features directly into the geometry.’
Two main ideas shaped the cover: modularity and generative design. The modular system breaks the cover into separate parts, including interchangeable front panels. Users can change how it looks without touching the main structure. In a field focused on function, that offers something rare: choice.
Generative design provides the engineering logic. Instead of solid surfaces, the structure uses algorithm-driven patterns. Material goes where it is needed and is removed where it is not. The goal is not decoration. It is efficiency. ‘We’re not removing material for the sake of it,’ Mercieca says. ‘We’re placing it precisely where it needs to be.’
The design then moved into parametric CAD. Parts were shaped for efficient printing. Snap-fit connections replaced bolts and glue, making assembly faster and maintenance simpler. The cover was also aligned with the existing prosthetic system, avoiding a full redesign.
From there, the design was refined step by step. Wall thickness, pattern density, and connection points were adjusted to balance strength, flexibility, and manufacturability. Generative features were used only where they made structural sense. The final cover is lighter, easier to assemble, and visually distinct, without added complexity.
Material choice followed the same logic. The design was optimised for widely available printers such as PRUSA and Ultimaker. ‘There’s no value in a design that can’t be produced reliably. We had to make sure it works with real-world equipment,’ Mercieca notes.
Continue reading this article by clicking on the below link.
The PREMIERTOGO project was funded by Xjenza Malta’s MCST FUSION R&I – Research Excellence Programme (R&I-2024-013L).
Information and image source:
- Xjenza Malta collaborated with the European Institute of Innovation and Technology (EIT) to introduce a dedicated Maltese category within the 2026 EIT Jumpstarter Call, creating new opportunities for local idea holders and start-ups to participate in one of Europe’s leading pre-accelerator initiatives. The programme supports early-stage innovators in transforming innovative ideas into viable business concepts through hands-on training, mentorship, and exposure to cross-border networks. By providing tailored support and practical guidance, the EIT Jumpstarter programme helps participants refine their ideas, strengthen their entrepreneurial capabilities, and broader their horizons towards commercialisation.
- The Prototype to Minimum Viable Product (P2M) Programme is designed to assist start-ups and SMEs in advancing prototypes towards market-ready minimum viable products. The programme provides financial and market support to help beneficiaries refine their technologies, test market feasibility, and strengthen product development processes. Through a number of small grants, P2M supports concept validation and market entry on the basis of productivity, achievement of KPIs and promising results. At the end of the programme, beneficiaries will be allowed to pitch their final product.
- The EIT Regional Innovation Booster (EIT RIB) Malta Edition is a flagship initiative launched through a collaboration between Xjenza Malta and the European Institute of Innovation and Technology (EIT) to support high-potential Maltese start-ups and SMEs with market-ready solutions. Targeting ventures with a Technology Readiness Level (TRL) of 7 or higher, the programme provides a structured pathway for businesses seeking to expand beyond local markets and strengthen their commercial growth potential. Through access to international expertise, tailored support from an EIT RIB Buddy, investor exposure, and financial assistance of up to €90,000, beneficiaries are guided through three structured stages focused on market readiness, commercial execution, and international exposure. The programme also facilitates access to European innovation ecosystems, strategic partners, and new market opportunities, supporting Maltese innovators in scaling across selected European markets and strengthening their internationalisation efforts.
- The Go To Market Loan Assistance Programme (GTM LA) is a blended finance initiative developed through a collaboration between Xjenza Malta and the Malta Development Bank (MDB) to support innovative SMEs and start-ups approaching market deployment. Operating under the MDB’s SME Guarantee Scheme (SGS), the programme helps enterprises address key financial barriers often faced during commercialisation, including limited collateral, high financing costs, and restricted access to credit. Through a combination of interest rate subsidies, support for up-front contribution requirements, and collateral assistance, the programme facilitates access to finance for innovators with technologies at advanced Technology Readiness Levels (TRLs). By easing financial pressures linked to market entry and scale-up activities, the GTM LA programme strengthens the transition from research and development towards sustainable commercial activity within the local and European innovation ecosystem.
Please visit the above links to view application deadline.
An information session for the EIT Regional Innovation Booster (EIT RIB) Malta Edition will be held online on 15 June 2026. If you are interested in attending, you may register here: https://lnkd.in/dNnnGmQR.
For more information on the Go To Market Programme, you may contact Ms. Mariah Vella on mariah.vella.5@gov.mt or Mr. Kyle Bonnici on kyle.bonnici.4@gov.mt
Information and image source:
Organisation:
Xjenza Malta
Call Deadline:
Wednesday, September 30, 2026
Further Information:
External Link
The Clean Energy Transition Partnership (CETPartnership) is a multilateral and strategic Horizon Europe partnership with the aim of driving the energy transition and contributing to the EU’s goal of becoming the first climate-neutral continent by 2050. It brings together funding from 50 programme owners across 30 countries, supporting a broad range of technologies and systems necessary for this energy transition.
The 2026 CETPartnership Joint Call is a 2-stage call structured around the following Call Modules:
- Integrated energy system resilience in a changing environment
- Energy system flexibility in a high renewable energy sources (RES) scenario: energy generation, storage and system integration
- Advanced renewable energy technologies for power production (Research-Oriented Approach)
- Advanced renewable energy technologies for power production (Innovation-Oriented Approach)
- Industrial Carbon Management
- Hydrogen and renewable fuels
- Stationary battery technologies and systems for climate-neutral industry and built environment
- Heating and cooling technologies
- Integrated regional energy systems
- Integrated industrial energy systems
- Clean energy integration in the built environment
The call modules describe specific topics and/or challenges that applicants shall address in their project proposal. Applicants must choose and apply under a specific call module when submitting their project proposal. Evaluation and ranking of the project proposals will be performed separately per call module.
Entities in Malta are eligible for funding in all call modules, with the option of requesting up to €500,000 to participate in CETPartnership proposal consortia. It is to be noted that if more than one national partner is present in one consortium, the total amount of funding for the participating national partners cannot exceed the €500,000 cap.
Visit the below link to download application forms and guidelines.
A national information session will be held online on the 19 June 2026 (10:00-11:00), please register HERE. A video recording of the session, as well as the presentation slides, will be available following the event.
For further information please contact the programme officers Ms Margherita Muscat at margherita.muscat.1@gov.mt, (+356) 2360 2339 and/or Ms. Christy Baldacchino at christy.baldacchino.2@gov.mt, (+356) 2360 2158.
Information and image source:
Organisation:
Xjenza Malta
Call Deadline:
Thursday, October 08, 2026
Further Information:
External Link
Visit the below link to view the 12 funding opportunities under Cascade Funding, an instrument by the European Commission.
Please note that these calls have different deadlines within the month of June 2026.
Information and image source:
Call Deadline:
Tuesday, June 30, 2026
Further Information:
External Link
The Clean Energy Transition Partnership Joint Call 2025 is officially launched.
🔍What is the CETPartnership?
The CETPartnership is a strategic Horizon Europe initiative that aims to drive and empower clean energy transition and contribute to the EU’s goal of becoming the first climate-neutral continent by 2050. The programme brings together funding from 50 programme owners across 30 countries, supporting a broad range of technologies and systems necessary for this energy transition.
ℹ️2026 Joint Transnational Call Details
The joint call is structured into 11 Call Modules covering various thematic areas and scopes. The key thematic areas addressed include:
Integrated energy system resilience in a changing environment
Energy system flexibility (renewables, storage, integration)
Advanced renewables for power production (ROA)
Advanced renewables for power production (IOA)
Industrial carbon management
Hydrogen & renewable fuels
Stationary battery technologies and systems
Heating & cooling technologies
Regional energy systems
Industrial energy systems
Clean energy in buildings
The application process is two-stage, first with Project Consortium choosing one call module and submitting a pre-proposal. Following an independent evaluation, selected pre-proposals will be invited to submit a full proposal.
Further details can be found in the 2026 Call Text.
🌍 Eligibility and Funding Details for Malta Entities
Entities in Malta are eligible for up to €500,000 to participate in CETPartnership proposal consortia. Applicants must apply in a consortium of at least 3 beneficiary partners from at least 3 participating countries. Interested applicants are encouraged to use the Partner Search Platform to connect with potential partners for your pre-proposals.
📅 Important Dates:
For further information please visit the Xjenza Malta CETPartnership Webpage and the CETPartnership Website.
If the CETPartnership call has sparked your interest, we encourage you to reach out to us for more information. Kindly contact us on eusubmissions.xjenzamalta@gov.mt or contact the Programme Managers:
Information and image source;
The THCS Joint Transnational Call 2026, “Access to Care”, has now progressed to the full proposal stage.
Malta continues to participate under the Widening initiative, allowing Malta-based entities to still join international consortia at this stage of the Call. Widening measure - Consortia with fewer than 9 partners may include one additional partner from an underrepresented funding organisation at full proposal stage, subject to eligibility and invitation.
Xjenza Malta has allocated a national budget of €500,000 to support the participation of Malta-based entities in successful projects. This Joint Call 2026 aims to fund research and innovation projects that contribute to ensuring equitable access to and utilisation of health and care services. Through the funded research and innovation projects, policy and decision makers should gain the knowledge and tools necessary to implement the reallocation of resources as the health and care system undergoes a transition to meet new and ongoing challenges.
Projects funded under this call will build on existing evidence to deliver innovative solutions that enable key stakeholders to reduce inequalities in access to and utilisation of health and care services. Projects will address how to improve access to all levels of health and care through financial models, models for delivering health and care services and setting up of interdisciplinary integrated care programmes.
Key Dates
Full proposal submission (THCS platform): 30 June 2026, 14:00 CEST (by Project Coordinator)
National submission (Xjenza Malta): 30 June 2026, 23:59 CEST via eusubmissions.xjenzamalta@gov.mt
Partner Search Tool
Applicants can:
Browse existing consortia
Indicate availability or expertise to join a proposal Browse or share your expertise via the partner search tool: https://partfinder.ncbr.gov.pl/ (filter: THCS Call 2026 widening)
We encourage all interested stakeholders to review the call text and national rules when joining this opportunity to advance equitable health and care systems.
For further details, visit the Xjenza Malta THCS Webpage and the THCS website. For any queries, you may contact us at eusubmissions.xjenzamalta@gov.mt
The THCS Joint Transnational Call 2026, “Access to Care”, has now progressed to the full proposal stage.
Malta continues to participate under the Widening initiative, allowing Malta-based entities to still join international consortia at this stage of the Call. Widening measure - Consortia with fewer than 9 partners may include one additional partner from an underrepresented funding organisation at full proposal stage, subject to eligibility and invitation.
Xjenza Malta has allocated a national budget of €500,000 to support the participation of Malta-based entities in successful projects. This Joint Call 2026 aims to fund research and innovation projects that contribute to ensuring equitable access to and utilisation of health and care services. Through the funded research and innovation projects, policy and decision makers should gain the knowledge and tools necessary to implement the reallocation of resources as the health and care system undergoes a transition to meet new and ongoing challenges.
Projects funded under this call will build on existing evidence to deliver innovative solutions that enable key stakeholders to reduce inequalities in access to and utilisation of health and care services. Projects will address how to improve access to all levels of health and care through financial models, models for delivering health and care services and setting up of interdisciplinary integrated care programmes.
Organisation:
Xjenza Malta
Call Deadline:
Tuesday, June 30, 2026
Further Information:
External Link